Screw Press Sludge Dewatering Machine 10-150m3/h 1kW

The screw press offers high efficiency, low energy consumption, fully automatic control and stable operation. It directly and continuously reduces water content from secondary settling tanks, maintaining sludge moisture content between 70-85%. Its compact design reduces capital investment and floor space requirements while minimizing odor and phosphorus release from sludge in concentration tanks. This significantly improves the capacity of subsequent deep dewatering equipment.

1. Conditioned sludge flows into the filter chamber from the flocculation tank and is pushed toward the discharging end
2. Water separates from sludge as the gap between shaft threads increases, flowing out through moving and fixed ring gaps
3. Moving and fixed rings self-clean to prevent machine blockage
4. Filtered sludge cakes are pushed forward by the shaft and discharged

As thickened sludge moves to the dewatering zone, the gradually narrowing gaps between rings and screw pitch increase pressure to enhance dewatering efficiency.

• Simple process with high efficiency, power saving, and low investment
• Programmable settings for convenient and accurate operation
• Precise chemical preparation and dosage reduces operational costs

• Compact Design: Requires minimal installation space compared to other technologies
• No Blockage: Self-cleaning mechanism handles oily sludge without clogging
• Cost Efficient: Consumes only 0.1-0.01kwh/kg-DS (1/8 of belt filter press, 1/20 of centrifuge)
• Automated Operation: No filter clothes or pores to clog, with easy automatic control